Skip to content

NHTSA Safety Recalls

2011 Ram 1500 Recalls

The 2011 Ram 1500 has 4 NHTSA safety recalls on file. Recall repairs are always free, whatever the car's age or mileage.

A recall covers a range of VINs, not every Ram 1500 built. Check your own 17-character VIN before assuming yours is affected.

4 recalls on the 2011 Ram 1500

SUSPENSION:REAR:AXLE:SPINDLE

NHTSA 10V656000
The defect
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2011 RAM 1500 TRUCKS MANUFACTURED FROM SEPTEMBER 2009 THROUGH DECEMBER 2010. SOME VEHICLES MAY HAVE EXPERIENCE A NOISE (GROWL, GRIND) COMING FROM THE REAR AXLE BEARING WHICH COULD EVENTUALLY SEIZE.
The risk
A FAILURE OF THE BEARING COULD CAUSE THE VEHICLE TO STALL INCREASING THE RISK OF A CRASH.
The fix
CHRYSLER WILL NOTIFY OWNERS AND WILL INSTALL AN OIL PORT INSERT INTO THE REAR AXLE FREE OF CHARGE. THE SAFETY RECALL BEGAN ON APRIL 4, 2011. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.

POWER TRAIN:AUTOMATIC TRANSMISSION:LEVER AND LINKAGE:COLUMN SHIFT

NHTSA 17V821000
The defect
Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.
The risk
Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
The fix
Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.

FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:MOUNTING

NHTSA 18V160000
The defect
Chrysler (FCA US LLC) is recalling certain 2009-2012 Dodge Ram 1500 trucks currently, or ever registered, in Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin and the District of Columbia. Exposure to environmental conditions such as water mixed with road salt may cause the front fuel tank strap frame "T-Slot" bracket to corrode, possibly causing the fuel tank to drop and make contact with the ground.
The risk
If the fuel tank were to drop and contact the ground, a fuel leak may result. Additionally, in the event of a crash, the fuel tank may not remain secured to the vehicle, possibly causing a fuel leak. A fuel leak in the presence in an ignition source, can increase the risk of a fire.
The fix
Chrysler will notify owners and dealers will bolt a bracket reinforcement to the frame, free of charge. The recall began May 2, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U04.

Reported August 3, 2018 by Chrysler (FCA US LLC)

POWER TRAIN:DRIVELINE:DIFFERENTIAL UNIT

NHTSA 13V038000
The defect
Chrysler is recalling certain model year 2009-2012 Ram 1500 trucks manufactured from February 27, 2008, through June 30, 2009, and from December 1, 2009, through October 20, 2011; model year 2009-2011 Dodge Dakota trucks manufactured from February 27, 2007, through June 30, 2009, and from December 1, 2009, through September 30, 2011; model year 2009 Chrysler Aspen trucks manufactured from January 3, 2008, through December 18, 2008; and model year 2009 Dodge Durango trucks manufactured from January 3, 2008, through December 18, 2008. The rear axle pinion nut may loosen due to an undersized pinion spline that can allow relative motion between the nut and companion flange.
The risk
If the rear axle pinion nut loosens, the axle can lock up and cause a loss of vehicle control and/or a vehicle crash with little warning.
The fix
On November 7, 2013 Chrysler notified owners that dealers would install a pinion nut retainer, free of charge. In July 2015, and under a consent order with NHTSA, the company agreed to offer owners three options for remedying their vehicles: perform the original remedy, offer to repurchase the vehicle at the fair market value plus 10%, or offer an additional incentive offer towards the purchase of a new Dodge, Jeep, Chrysler, or Fiat vehicle. Chrysler will notify owners of the new recall options in a letter expected to be mailed on August 31, 2015. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N08.

Reported June 2, 2013 by Chrysler Group LLC

Checking your own car

A recall applies to a range of VINs, not to every 2011 Ram 1500 built. To confirm whether yours is affected, find the 17-character VIN on the driver-side dashboard or door jamb and enter it in NHTSA's official lookup.

Repairs for safety recalls are free and never expire. A dealer cannot charge you, and cannot refuse on the grounds that the car is old or out of warranty. If one does, call the NHTSA hotline on 1-888-327-4236.

Ram 1500 by model year

Other 2011 Ram models